Description
- Compliant Product Which Meets Vermont SB-152
- Easy To Disassemble, No Flaring Tool Required
- Primary Uses: Water, Gasoline, Oil and Vacuum Lines
- 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
- 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
- Three Piece Construction – Nut, Sleeve (Or Ferrule) And Body
- To Buy Compressions Fittings with Long Nut, Please Add a “1” In Front Of The Part Number. (i.e. 68 = 168)
- 1. Cut Smooth, Square End On Tubbing
- 3. Insert Tube Into Fitting
- Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
- Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
- Compliant Product Which Meets California AB-1953
- Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
- To Assemble:
Height
1.00
Length
1.00
Width
1.00
Hazardous Material
No
ECCN
EAR99
Country Origin Code
CN
Application
For gasoline, oil, vacuum lines and water
Connection Type
Compression
Diameter
7/8″
Pressure rating
75 psi
Nomenclature
750060-14 COMP SLV 7/8 LF
Material
Brass
Fitting Size
7/8 In.
Fitting Type
Sleeve
End Connections
Sleeve
Maximum Working Pressure (Psi – 3 Decimals)
750
Product Service Code
4720
Vendor Drop Ship
N
Reviews
There are no reviews yet.