Description
- 3. Insert Tube Into Fitting
- Primary Uses: Water, Gasoline, Oil and Vacuum Lines
- 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
- 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
- Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
- Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
- Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
- 1. Cut Smooth, Square End On Tubbing
- To Assemble:
- Easy To Disassemble, No Flaring Tool Required
- Three Piece Construction – Nut, Sleeve (Or Ferrule) And Body
- To Buy Compressions Fittings with Long Nut, Please Add a “1” In Front Of The Part Number. (i.e. 68 = 168)
Height
0.30
Length
1.00
Width
1.00
Hazardous Material
No
ECCN
EAR99
Country Origin Code
US
Application
For gasoline, oil, vacuum lines and water
Nominal Size
1/2″
Temperature Rating
-65 to 250 deg F
Nomenclature
00560-08 60P 1/2 DELRIN SLEEVE
Length_UOM
in
Reviews
There are no reviews yet.