Description
- 1. Cut Smooth, Square End On Tubbing
- To Assemble:
- 3. Insert Tube Into Fitting
- Easy To Disassemble, No Flaring Tool Required
- Primary Uses: Water, Gasoline, Oil and Vacuum Lines
- Three Piece Construction – Nut, Sleeve (Or Ferrule) And Body
- To Buy Compressions Fittings with Long Nut, Please Add a “1” In Front Of The Part Number. (i.e. 68 = 168)
- 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
- 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
- Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
- Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
- Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
Height
1.00
Length
1.50
Width
1.50
Hazardous Material
No
ECCN
EAR99
Country Origin Code
US
Application
For gasoline, oil, vacuum lines and water
Nominal Size
5/8″
Temperature Rating
-65 to 250 deg F
Nomenclature
00560-10 60P 5/8 DELRIN SLEEVE
Length_UOM
in
Reviews
There are no reviews yet.